
It is consist of welded mesh panel,round tube frame(square tube
frame),plastic feet and top connection. This kind of fence has a
superior structure, the globality,mobility and environmental
suitability is very good .The fence is easy transport , dismantle
easily ,low cost . It has the advantage of one cost, many times
used.
Material: hot dip galvanized tube and wire
Zinc coating: 200g/m2 on wire,300g/m2 on pipes
Hot Dipped Galvanized : Australian Standard-42 Microns.
Two type of Temporary fence
1. Welded tempoary fence 2. chain link temporary fence
Accessories of temporary fence
1.
The clamp of Temporary Fence
---High quality Temporary Fence Clamps.
---Hot Dipped Galvanized TO Australian Standard-42 Microns.
---Specially moulded and 4 mm thick for additional strength.
2.
Cemented plastic fence feet
---Standard specification:580mm long,245mm wide,130mm high
---Thickness of the block:2.5mm
---Hole diameter:25mm,32mm,42mm & 48mm
Our plastic fence feet offer the following benefits over standard
concrete fence feet:
---Made of plastic which is made from polypropylene.
---UV5 for sun/weather protection.
---A piece of high quality steel bar for reinforcement.
---Post holes can run across or go up and down the blocks.
---Designed to be filled with concrete.
the fencing brace:
Temporary fence stays are used to support the temporary fence in
high wind situations or on long runs to ensure the fence once
erected remains secure.
Fence stays are hot dipped galvanised to Australian Standard - 42
Microns and are attached to the mesh panels by 2 clamps and
weighted down by concrete filled plastic feet.
Applications of Hot dip galvanized Australia temporary fence
1. commercial construction sites 2. Domestic housing sites
Temporary fence welded quality control
1. Use carbon-dioxide arc welding(CO2gas)
2. Anti -climb mesh infill
3. 360° weld between the vertical & horizontal pipe
4. High zinc coating on pipes 42 microns =300g/m2
Temporary fence produce process
Pre hot dip gal. wire drawing--- cut wire and pipes ---wire
welded---cut the corners of the mesh---Pre hot dip gal. pipes
welded-polish the welds-paint anti-rust epoxy-spray sliver powder
coat on each welds-stacking-packaging
Specification of Temporary Fence
Specification | Popular |
Panel Size: | 2400mm(L) x 2100mm(H) |
Frame: | 32mm O.D. |
Infill Mesh: | 4mm horizontal, 4mm vertical |
Weight: | 22kgs |
Finish: | Hot Dipped Galvanized to Australian Standard - 42 Microns |
Recommended Specification of temporary fence
Specification | Spotted by 3-5mm diameter quality mild steel wire |
Opening (mm) | 75x75 75x100 60x150 50x50 60x60 etc |
LxW (mm) | 2100x2400 1800x2400 2100x2900 2100x3300 etc |
Finish: | Hot Dipped Galvanized to Australian Standard - 42 Microns |
Different specifications are available according to customers'
special inquiry or detailed drawings.
Character of temporary fence
1. It is made by good quality Q195 wire and Q235 pipes with high
strength.
2. Treatment is hot dipped galvanized,and 200g/m2 on wires,300g/m2
on pipes.
3.It can last more than 10 years,save your maintenance cost.
4. Easy to relocate & stackable
5.No digging or pavement damage with the plastic concrete feet
6. Quick installations & removal,and it can be taken by one person
7. Guaranteed long-term use without rusting
8. Allow repeated use, rental, or resale
9. Corrosion resistant, age resistant, sunshine proof, weather
proof, easy installation and move
Packaging of temporary fence
1>There is rubber mat at the bottom of the pallet to avoid the
pallet destroyed the panels
2>There is 4 metal corners to keep the pallet more strong.
3>There is metal plate under the plastic bandage to reduce the
apressure of fence panels.
4>There is wooden plate at the top of fence panel which can
protect the fence panels from being crushed by other pallets.
Top Fence Co.Ltd
Top Fence co focused on manufacturing premium temporary fencing kit at a cost efficient rate covered with temporary fencing panels HDPE foot as well clamp system ,temporary fencing bracket ,temporary fencing gates etc, Annual we manufactured at least 50000 piece temporary fencing sold well in australia market such as brisbane ,Melbourne ,Perth ,Fremental .The products we manufactured adopt to AS 4687-2007 Standard Required .For sake of saving laborforce cost we imported welding robots from germany to eliminate the procedure not necessary to operate by workers so enable us always can pass a competitive rate .We serve more than 200 client in Australia ,among of them there are 20 regular long term clients what we achieved is casue we build complete after sale service and quality control system,our inspectors are through yearly professional training who help us to win a good repuation in local Australia .Top Fence take customers accurate requirements of market as key point of mutual profit and business success.Adquate market investigation made us to reserach and develop the temporary fencing to meet any group client requirments such as Standard Temporary Fence Classfied 14 microns /42 microns zinc layer ,Economic Temporary Fence etc
Advantage
|
PLUS |
We owned all of productions equipment in one manufacturing shop ,we supply temporary fencing panels ,clamp ,foot by owned facility |
What we manufactured temporary fencing materials are fully meet AS4687-2007 standard which testing by more than 200 clients |
We have full range and a complete system of temporary fencing products to meet any requirements of Australia market |
We have achieved a excellent system which from purchase to sale always in high position of temp fencing market |
We created and enhance the system of after sale service and policies of replacement for client better purchase experience |
What is required Custom clearance papers In Australia for first time import temporary fencing ? |
Commercial Invoice ,Packing List ,Packing Declaration ISPM 15 ,TYPE 50 ,Free Trade Agreement Certificated ,all papers will emailed after departure |
What is you payment Term of order? |
We prefer TT 30% deposit balance 70% at sight of bill of lading copy ,actually you could paid balance before container arrival port of Australia |
What is MOQ ? |
Our MOQ is 250 kit included panels ,foot ,clamp because the Full container load imported are most saving way to purchase temporary fence ,less full container imported will be charge a high duty and local cost by Ship master in Australia and New Zealand |
If we arrange a trip to visit you factory would please pick us up ? |
Obviously Yes ,,the nearest international air port from us is SHIJIAZHUANG or BEIJING 3 hours trips we will arrange accommodation and amenity when you are in china |
Sample, Would you please send us a sample for testing quality |
Would you please send us a sample for testing quality Yes we can ,sample are free but please send us postage finally if you order us the parts of cost will be deduct from order |